Tuesday, September 30, 2008


We Recently shot in a movie theater for a commercial that involved a few people enjoying a movie while food was brought out to them. Upon first scouting the location I knew that we would have to bring in a good amount of lighting due to how dark it was inside of the theater. However, I found that I needed even more lighting then I had originally planned for.

To light inside of the theater I used a 1k open face light into a small sized chimera(also called a soft box), bringing board ambient light to the room. I then placed a 650 fresnel with a diffussion gel to bring soft light to the side of the theater where our character entered from. Once those were in place, we set up a 150 fresnel with diffusion for the actor's faces and a 300 fresnel with half CTB behind the characters to mimic the projector light.

It looked as though we had more then enough light to our human eyes,however, the camera thought otherwise. With the gain on, the camara was able to get normal exposure, but it was as grainy as a sand box! I had to move all the lights as close to the actors as possible, remove the chimera from the 1k, and bounce the light from the 1k off the cealing above the actors to have enough light for the camera to get correct exposure for the shot.

Cameras are not as good as our eyes and need more light to be able to pick up an image.This is always an interesting thing for me to observe. My lighting idea worked fine, it was the amount of light I needed that I miscalculated for. Next time I'll be better prepared.

Travis looking at a reel of Film.


No comments: